Industry leading 3 YEAR WARRANTY

Single Point Safety Lock Release System

Two Set of 3″ and 6″ Tall Truck Adapters Included; 6’7″ Lift Height Maximum with Truck Adapters

CE Certified Lift Structure and Hydraulic System – Tested for 115% Dynamic Load Capacity and 150% Static Load Capacity

All Robot Welded Structure with Durable Powder Coated Finish

APlusLift AP-12SR is a 12000LB single point release overhead car lift (auto hoist) built with quality materials and good workmanship.

We are proud to offer an industry leading 3 year warranty for all parts (a $499 value)! We have all replacement and optional parts available for our lifts.

Free shipping to lower 48 states with forklift (or similar) on-site, or free pickup at nearby terminal. Car lifts require on-site forklift (no liftgate). We strongly recommend against renting a forklift; expense not reimbursed. See shipping policy below for limited access/remote/high-cost areas.

Warehouse Pickup Locations (Contact Us for $300 Discount): Tacoma (WA)

Specifications

Model    AP-12SR

(This Model)    AP-10SR

(for Comparison)

Manual    AP-12SR Manual    AP-10SR Manual

Style    Overhead    Overhead

Lock Release    Single Point Release    Single Point Release

Warranty    3 Years (36 Months)    3 Years (36 Months)

Lifting Capacity    12,000 LB    10,000 LB

Overall Height    165″    143 3/16″

Overall Width    149″    134 5/16″

Maximum Lift height with Truck Adapters    79″    81″

Maximum Lift height without Truck Adapters    70″    75″

Minimum Height of Adjustable Pads from Ground    4″    4″

Drive Through Width (Carriage to Carriage)    109″    100″

Column to Column Width    123″    109″

Column Cross Section    14 3/8″L x 7 13/16″W    11″L x 7″W

Driving Mode    Dual hydraulic cylinders, direct drive    Dual hydraulic cylinders, chain drive

Motor    220V Single Phase 4HP (recommend a 30A breaker)    220V Single Phase 3HP (recommend a 30A breaker)

Hydraulic Oil    3-5 gallons AW32/AW46 (Not Included)    3-5 gallons AW32/AW46 (Not Included)

Time to full rise    75 seconds    50 seconds

Shipping Weight    2500 LB    1400 LB and 120 LB

Shipping package size    117″L x 22″W x 50″H    

113″L x 22″W x 40″H (Car Lift)

38″L x 17″W x 14″H (2ft Height Extension Crate)

Arm Assembly    Symmetrical Arm Assembly    Combo (Symmetrical and Asymmetrical) Arm Assembly

Front Arms    Straight Front 3 Stage reach from 37 1/2″ to 72 3/16″    Straight Front 3 Stage reach from 22 7/8″ to 42 5/8″

Back Arms    Straight Rear 3 Stage reach from 37 1/2″ to 72 3/16″    Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″

Column Steel Thickness    1/4″    13/64″

Carriage Steel Thickness    1/4″    15/64″

Carriage Yoke Thickness    3/4″    9/16″

Arm Steel Thickness    5/16″    15/64″

Base Plate Steel Thickness    13/16″    5/8″

Truck Adapters (Height Extensions)    Two Sets: 3″ Tall and 6″ Tall    One Set: 4″ Tall

Other Parts Included    

4 adjustable screw pads

10 anchor bolts

10 shims

Optional Parts    2 3/4″ and 6″ Tall Truck Adapters

Concrete Requirement    6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)

Features

Direct drive mode

Durable hydraulic system

Easy to operate and maintain

Single point safety lock release

Double Seal Rings Protecting PU Material

Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel

Lifting operation by pressing “UP” button on motor

Manual lowering operation by pressing lever

Relief valve built in power pump to prevent overloading

Automatic arm lock restraints

Relief valve built in power pump to prevent overloading

Door guards protection rubber

Up-limit switch to protect cylinders working stroke used in safe length scope

Heavy duty 3/8″ diameter cable and 4 5/16″ pulley that reduce high stress on synchronization process and increase cable life

Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down