INDUSTRY LEADING 3 YEAR WARRANTY

COMBO (SYMMETRICAL AND ASYMMETRICAL) ARM ASSEMBLY WITH ADJUSTABLE SCREW PADS!

CE CERTIFIED LIFT STRUCTURE AND HYDRAULIC SYSTEM – TESTED 115% DYNAMIC LOAD CAPACITY AND 150% STATIC LOAD CAPACITY

ONE SET OF 4″ TALL TRUCK ADAPTERS INCLUDED; 6’9″ LIFT HEIGHT MAXIMUM WITH TRUCK ADAPTERS

ALL ROBOT WELDED STRUCTURE WITH DURABLE POWDER COATED FINISH

APLUSLIFT HW-10KOH-A CAR LIFT (AUTO HOIST) IS ONE OF THE MOST AFFORDABLE OVERHEAD CAR LIFTS BUILT WITH QUALITY MATERIALS AND GOOD WORKMANSHIP. THE LIFT HAS A STRONG DOUBLE “S” COLUMN DESIGN TO SUPPORT 10,000 LB CAPACITY.

SPECIFICATIONS

Installation Manual

Overall Height: 143 3/16″

Overall Width: 134 5/16″

Maximum Lift height with Truck Adapters: 81″

Maximum Lift height without Truck Adapters: 75″

Minimum Height of Arm Top: 4.5″

Drive Through Width (Carriage to Carriage): 100″

Column to Column Width: 109″

Column Cross Section: 11″L x 7″W

Driving Mode: Dual hydraulic cylinders, chain drive

Motor: 220V Single Phase 3HP 10A (recommend a 30A breaker)

Hydraulic Oil: 3-5 gallons AW32/AW46 (Not Included in the Package)

Lifting Capacity: 10,000 LB

Time to full rise: 50 sec

Combo (Symmetrical and Asymmetrical) Arm Assembly

Straight Front/Rear 3 Stage reach from 22 7/8″ to 42 5/8″

Straight Rear 2 Stage reach from 33 5/8″ to 52 7/8″

4 Pieces of Adjustable Screw Pads Included

4 Pieces of 4″ Tall Truck Adapters (Height Extensions) Included

Shipping Weight: 1,450 LB

Shipping package size: 113″L x 22″W x 40″H

Concrete Requirement: 6″ thick at 3500 psi reinforced with fiberglass or steel (4″ thick for vehicles 9000LB and below)

10 anchor bolts and 10 shims included

Tool trays and toe guards included

Column Steel Thickness: 13/64″

Carriage Steel Thickness: 15/64″

Carriage Yoke Thickness: 9/16″

Arm Steel Thickness: 15/64″

Base Plate Steel Thickness: 5/8″

FEATURES

CE Certified Lift Structure and Hydraulic System

Third party tested with a dynamic load capacity of 115%

Third party tested with a static load capacity of 150%

Durable hydraulic system

Easy to operate and maintain

Double point safety lock release

Double Seal Rings Protecting PU Material

Carriage Material Q355 (ASTM A572), Stronger Than Normal Q235 Steel

Lifting operation by pressing “UP” button on motor

Manual lowering operation by pressing lever

Relief valve built in power pump to prevent overloading

Automatic arm lock restraints

Relief valve built in power pump to prevent overloading

Door guards protection rubber

Up-limit switch to protect cylinders working stroke used in safe length scope

Heavy duty 3/8″ diameter cable and 5″ pulley that reduce high stress on synchronization process and increase cable life

Ultra high molecular self lubricating nylon slider that ensures carriage smooth moving up and down